Clausius-Mossotti relation

From Knowino

Jump to: navigation, search

In physics, the Clausius-Mossotti relation ^[1] ^[2] connects the relative permittivity ε_r of a dielectric to the polarizability α of the atoms or molecules constituting the dielectric. The relative permittivity is a bulk (macroscopic) property and polarizability is a microscopic property of matter; hence the relation bridges the gap between a directly-observable macroscopic property with a microscopic molecular property.

The Clausius-Mossotti equation for dielectric matter consisting of atoms or (non-polar) molecules is

$\frac{\epsilon_r -1}{\epsilon_r+2} = \frac{1}{3\epsilon_0} N \alpha,$

where ε₀ is the electric constant (permittivity of the vacuum) and N is the number density (number of atoms or molecules per volume).

The index of refraction n of a dielectric is given by

$n = \sqrt{\epsilon_r \mu_r} \approx \sqrt{\epsilon_r},$

where we used that for most dielectric matter the relative magnetic permeability μ_r is very close to unity. Substitution of this value of n gives the Lorentz-Lorenz relation

$\frac{n^2 -1}{n^2+2} = \frac{1}{3\epsilon_0} N \alpha.$

[edit] Derivation

Consider a dielectric with number density N (number of particles per unit volume) in an external electric field E. The sum of E and an internal field E_int induces a dipole p_ind on each particle. The polarization vector P is the sum of the induced dipoles,

$\mathbf{P} = N \mathbf{p}_\mathrm{ind}.$

From the relation between P, the electric displacement D, and the electric field E follows

$\mathbf{P} = \mathbf{D} - \epsilon_0\mathbf{E} = \epsilon_0(\epsilon_r-1) \mathbf{E}.$

To get an expression for p_ind, we consider a single particle (molecule or atom) in a little spherical cavity inside the dielectric. It is shown below that the total field inside this cavity can be approximated by

$E_\mathrm{tot} = E + E_\mathrm{int} = E + \frac{1}{3\epsilon_0} P,$

where we introduced the absolute magnitudes of the vectors, which is allowed because they all lie along the z-axis, the direction of E. The field E_tot is often referred to as the Lorentz local field (and in that context designated as E_loc). The Lorentz local field approximation is based on the assumption that the long-range interactions are isotropic and so it is only realistic for liquids and isotropic solids.

Now,

$p_\mathbf{ind} =\alpha E_\mathrm{tot} = \alpha (E + \frac{1}{3\epsilon_0} P) =\alpha E (1+\frac{\epsilon_r-1}{3} )$

Further,

$P = \epsilon_0(\epsilon_r-1) E = N\alpha E (1 + \frac{1}{3}(\epsilon_r-1)) \quad\Longrightarrow \quad \epsilon_0(\epsilon_r-1) = \frac{N\alpha}{3} (2 +\epsilon_r),$

from which the Clausius-Mossotti relation follows directly.

We neglected here the contributions to the total field in the cavity from the other molecules in the cavity. It can be shown that these contributions average out in most dielectrics.

[edit] Local field in dielectric

Slab of dielectric (green) in external electric field E. Microscopic spherical cavity (size greatly exaggerated in drawing) of radius r in dielectric.

A macroscopic slab of dielectric is placed in an outer electric field E (the z-direction) that polarizes the dielectric, so that a charge density is created on the outer surfaces perpendicular to E. Since E "pushes" positive charge and "pulls" negative charge, the sign of the charge density on the outer surfaces is as is indicated in the figure. The polarization vector P points by definition from negative to positive charge. The surface charge densities are in absolute value equal to |P| ≡ P.

An infinitesimally small spherical cavity of radius r is made in the dielectric and inside this cavity there is vacuum with permittivity (electric constant) ε₀. The cavity is so small that the polarization vector P is not affected by it. If the cavity had been rectangular with walls parallel to the charged macroscopic surfaces of the slab, the charge density on the walls of the cavity would have been the same (in absolute value) as on the outer surfaces of the slab (P), because of electric neutrality. Since the surface of the cavity is spherical, it has the charge density,

$\sigma(\theta) = -\mathbf{n}\cdot\mathbf{P} = -P \cos\theta ,$

where n is a unit length vector perpendicular to the surface of the cavity at the point θ, see the figure. By definition, the positive direction of the normal n is outward.

An infinitesimal surface element at θ+π (red in the figure)

$d\Omega = r^2\;|\sin(\pi+\theta)|\; d\theta d\phi=r^2\;\sin\theta\; d\theta d\phi, \quad 0\le \theta \le \pi,$

on the wall of the cavity gives a contribution to the internal electric field dE_int parallel to n,

$d\mathbf{E}_\mathrm{int} = \mathbf{n} \frac{\sigma(\pi+\theta) d\Omega}{4\pi \epsilon_0 r^2} = -\mathbf{n}\frac{P\cos(\pi+\theta)\; d\Omega}{4\pi \epsilon_0 r^2} =\mathbf{n} \frac{P \cos\theta\sin\theta d\theta d\phi}{4\pi \epsilon_0 }.$

The z-component of n is cosθ and hence the contribution to the field in the z direction is

$dE_{\mathrm{int},z} = \frac{P}{4\pi \epsilon_0} (\cos\theta)^2\sin\theta d\theta d\phi.$

Contributions in other than the z direction cancel mutually. Integration over the whole surface gives

$E_{\mathrm{int},z} = \iint dE_{\mathrm{int},z} = - \frac{P}{4\pi \epsilon_0} \int_{0}^{\pi} (\cos\theta)^2 d\cos\theta \int_{0}^{2\pi} d\phi = \frac{1}{3\epsilon_0} P.$

The total electric field in the cavity (the "Lorentz local field") is in the z direction and has magnitude

$E_\mathrm{tot} = E + E_\mathrm{int} = E + \frac{1}{3\epsilon_0} P.$

[edit] References

↑ O. F. Mossotti, Discussione analitica sull’influenza che l’azione di un mezzo dielettrico ha sulla distribuzione dell’elettricità alla superficie di più corpi elettrici disseminati in esso, Memorie di Mathematica e di Fisica della Società Italiana della Scienza Residente in Modena, vol. 24, p. 49-74 (1850).
↑ R. Clausius, Abhandlungen über die mechanische Wärmetheorie, vol. 2, p. 143, Friedrich Vieweg und Sohn, Braunschweig (1867). Note that the parameter g of Clausius is equal to (ε-1)/(ε+2) and that he gives the expression in words. Online

[0] O. F. Mossotti, Discussione analitica sull’influenza che l’azione di un mezzo dielettrico ha sulla distribuzione dell’elettricità alla superficie di più corpi elettrici disseminati in esso, Memorie di Mathematica e di Fisica della Società Italiana della Scienza Residente in Modena, vol. 24, p. 49-74 (1850).

[1] R. Clausius, Abhandlungen über die mechanische Wärmetheorie, vol. 2, p. 143, Friedrich Vieweg und Sohn, Braunschweig (1867). Note that the parameter g of Clausius is equal to (ε-1)/(ε+2) and that he gives the expression in words. Online

[1]

[2]

Clausius-Mossotti relation

[edit] Derivation

[edit] Local field in dielectric

[edit] References

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Community

Toolbox